How to Install Linentree Peel and Stick Tile Stickers
One of the easiest ways to fill a blank wall is to install Linentree Peel and Stick Tile Stickers. As a decorative vinyl sticker, is easy to apply and will last for several years – all without leaving a mark. Use a wall sticker to add visual interest to a living room wall. Read on to learn how to apply a wall panel so it lasts for years to come.
Get step-by-step instructions to learn how to installLinentree Peel and Stick Tile Stickers here!
What You'll Need
- An all-purpose wall cleaner
- A small towel or cloth
- A box cutter or a pair of scissors
- A Pencil
- A stainless steel ruler
- A plastic smoother
How To Install 3D Peel And Stick Wall Tiles
- Step 1: Clean the surface
Clean and dry your wall. Kindly note that all the basic wall surfaces must be flat, dry, clean, and firm. Aged wall surface must be painted with water-based seal primer to fix the loosened surface.
*Tips: If your walls are freshly painted, wait up to three weeks before applying tiles.
- Step 2: Plan & Cut
Plan where you want to install and cut the size accordingly to better fit the wall. Cut the size accordingly to better fit the wall.
- Step 3: Peel & Stick
Remove the protective top film on the design side (Some products do not require treatment without a protective top film), then peel off the backing and stick side by side for a seamless appearance. Check to make sure the edges are overlapped and aligned, apply light pressure so you can easily reposition and adjust the placement if needed. Press firmly once you are certain of placement with a plastic smoother to ensure best possible adhesion, especially the grout lines or the most concave area of the tile surface.
- Step 4: Finish & Enjoy
Repeat these steps to continue tiling your wall for a seamless look!
Important Tips:
If your walls are freshly painted, wait up to three weeks before applying tiles.
*The wall tile can be applied to over existing tiles, can be used on almost smooth surfaces such as Kitchen backsplashes, Bathroom, Laundry Room, Living Room, Bedroom, Fireplace, RV/Camper, Dining room, walls under the stairs
The wall tile should not be directly in contact with flames, steam, or submerse in water.
In long-lasting usage, we recommended keeping 12 inches or 30 cm away from the center of the stove and fireplace.
We do not recommend installing Peel and Stick Tile Stickers in your shower since they will be in direct contact with water.
If you want to remove the tile, you could use a hairdryer to warm up the adhesive and pull softly starting with the corners.
Before installation, make sure that the ambient temperature is between 18 °C (65 °F) and 35 °C (95 °F) and that the tiles are at room temperature. If the ambient temperature is not suitable or for other reasons, it is recommended that 3M Purpose 45 Spray Adhesive be used to ensure optimum adhesion.
